Definitions

Topics covering shipping, cleaning, and spray-coating lacquers, gold-sputtering wax masters, as well as electroforming fathers mothers & sons, centerpunching, edge trimming, and preforming vinyl pressing stampers...
Post Reply
User avatar
13104P1
Posts: 12
Joined: 03 Apr 2013, 06:28
Contact:

Definitions

Post by 13104P1 » 04 Apr 2013, 03:39

Just saw this site with electroforming definitions. It's almost accurate, afaict. Pretty close. They still want to call the electroforming solution a "precision electroplating bath," but as we've discussed, no plating is desired, so they should have called it a precision "elecrtodeposition" bath. But no one would be confused... *L*

http://www.optiforms.com/definitions2.html

- 1310AP1

User avatar
Dr3d Sl3d
Site Admin
Posts: 43
Joined: 03 Apr 2013, 01:11
Location: All over the world...
Contact:

Re: Definitions

Post by Dr3d Sl3d » 06 Apr 2013, 23:45

I've always liked this site's descriptions of the jargon.

http://dalmar.net/electroforming.htm



Forming is making something altogether new, whereas plating imparts a (relatively) thin finish, such that it has a new surface. Since the ions are pulled onto the disc surface, it seems that we want it to plate there... But the silver is what becomes "plated" onto the new form, rather than onto the mandrel, to which it is only spray-coated, and could be rinsed off...

So, there's no plating wanted in conventional vinyl record stamper manufacture. If one still had access to the special Nickel spray solution, there would be no need to etch away the reverse-plate of Silver that inconveniences the "father," since there would be no confounding phase to interfere with the pressure and heat of pressing, because Nickel has the same properties as Nickel. (;

2 marks, to Luigi Brugnatelli for thinking this stuff through, so very long ago...

- Saùde,
Dr3d Sl3d
Cappin' the Rap in the M&M's...

Post Reply