Page 1 of 1

SX-68 chip tube nozzle holder

Posted: 20 Feb 2017, 05:04
by 13104P1
Record Presser has this nice photo online of the way their chip tube nozzle attaches to an extension tube which is attached to the body of the SX-68 and which enters the lathe's chip suction tube. This way, the suction nozzle entrance not only scans the spray of lacquer in synchronism with the vertical changes during stereo cutting, it is also applied with identical proximity to the stylus heater wires when the head is lowered or lifted.
SX-68_nozzleview.php.jpg
SX-68_nozzleview.php.jpg (50.69 KiB) Viewed 3385 times

boogie