SX-68 chip tube nozzle holder

Georg Neumann GmbH, Neumann lathes, cutters, amplifiers, tape machines, microphones, and processors.
Post Reply
User avatar
13104P1
Posts: 12
Joined: 03 Apr 2013, 06:28
Contact:

SX-68 chip tube nozzle holder

Post by 13104P1 »

Record Presser has this nice photo online of the way their chip tube nozzle attaches to an extension tube which is attached to the body of the SX-68 and which enters the lathe's chip suction tube. This way, the suction nozzle entrance not only scans the spray of lacquer in synchronism with the vertical changes during stereo cutting, it is also applied with identical proximity to the stylus heater wires when the head is lowered or lifted.
SX-68_nozzleview.php.jpg
SX-68_nozzleview.php.jpg (50.69 KiB) Viewed 3386 times

boogie
Post Reply