0,6 and 0,7 mil tip conical

Forum for discussing cartridges, styli, overhang, tracking force, scanning rake angle, vertical tracking angle, diameter loss, rumble, time constants, and anything else that gets picked up along the way...

0,6 and 0,7 mil tip conical

Postby Dr3d Sl3d » 03 Apr 2013, 09:07

What's up with these two oft-cited, super-similar standards? That seems closer than 50 Hz versus 60 Hz... It's even closer in kind than 44,1 kHz and 48 kHz. Ach so. I can see how 0,5 is not 0,7 mils. But 0,6 mils is often seen, in spite of the ubiquity of the 0,7 reference for microgroove-scanning sphericals.... Such as these Sanyos half way down page...

http://www.adelcom.net/SanyoStylus1.htm


...and, Serif, here's a spherical that's 0,6 mil and uses no more than 1,25 Pramanik recommended weight... Ideal lacquer player? Or ideal back hoe?


http://www.vinylengine.com/library/dual/m91.shtml

SaĆ¹de,
Dr3d Sl3d
Cappin' the Rap in the M&M's...
User avatar
Dr3d Sl3d
Site Admin
 
Posts: 43
Joined: 03 Apr 2013, 01:11
Location: All over the world...

Re: 0,6 and 0,7 mil tip conical

Postby 13104P1 » 06 Apr 2013, 01:32

Me, I'on not worried about the actual (spec) dimensions of sphericals. I'm all into this Ortofon VMS30MKII that seems as clear and true now as it did 20 hours ago. Hehe.. Yeah, I don't listen a lot. Just when I want. I set er as light as she'll track and watch the antiskate ain't overdone...crank it up and rest me head on the arm of the couch - often face-down. The sound waves ricochet off the floor, which is only half-carpeted, and that ricochets off me face and glasses... I think I could hear at least that... Not sure about what gas was used for coil cooling during the cut... Something that was crammed in a Suede Brown K bottle with a nice Harris valveset, I might add. Someone on SSoLT says air is better than nothing, provided it's not moist or dirtily-delivered.


-13104P1
User avatar
13104P1
 
Posts: 12
Joined: 03 Apr 2013, 06:28


Return to Pickup

Who is online

Users browsing this forum: No registered users and 0 guests

cron