Dopplegänger Neumann
Posted: 14 Jan 2015, 20:15
On ebay, now, is a vintage Neumann double-lathe. It has a mono cutter for each lathe and tube amps, with controls. Would be a very nice project for someone to work on. Monos make very good dance hall records. King Tubby?
No microscope, but, it's fixed pitch, so maybe you can just make sure not to wiggle more than about 135 LPI will tolerate? (;
(right-click "View Image" or "Open image in new tab" to see entire picture)
http://www.ebay.com/itm/Neumann-record- ... 4341&rt=nc
Saùde,
Dr3d Sl3d
No microscope, but, it's fixed pitch, so maybe you can just make sure not to wiggle more than about 135 LPI will tolerate? (;
(right-click "View Image" or "Open image in new tab" to see entire picture)
http://www.ebay.com/itm/Neumann-record- ... 4341&rt=nc
Saùde,
Dr3d Sl3d